e_154_ap
e_154_ap
Klik hier
Info met toepassingsvoorbeeld
9in/4out distribution system with passive terrestrial input and 8 satellite inputs, with integrated power supply. Switching between inputs is done by DiSEqC 1.0 commands or by analogue commands 13/18 V, 0/22kHz and Tone Burst. The unit is Quad LNB compatible

e_155_ap
e_155_ap
Klik hier
Info met toepassingsvoorbeeld
9in/8out distribution system with passive terrestrial input and 8 satellite inputs, with integrated power supply. Switching between inputs is done by DiSEqC 1.0 commands or by analogue commands 13/18 V, 0/22kHz and Tone Burst. The unit is Quad LNB compatible

e_150_ap_12
e_150_ap_12
Klik hier
Info met toepassingsvoorbeeld
9 inputs distribution system for up to 12 subscribers with passive terrestrial path, with integrated power supply. Switching between inputs is done by DiSEqC 2.0 commands or by ananalogue commands 13/18 V, 0/22kHz and Tone Burst. The unit is not Quad LNB compatible.

e_150_cp_12
e_150_cp_12
Klik hier
Info met toepassingsvoorbeeld
9 inputs distribution system for up to 12 subscribers with active terrestrial path, with integrated power supply. Switching between inputs is done by DiSEqC 2.0 commands or by ananalogue commands 13/18 V, 0/22kHz and Tone Burst. The unit is not Quad LNB compatible.

e_150_ap_16
e_150_ap_16
Klik hier
Info met toepassingsvoorbeeld
9 inputs distribution system for up to 16 subscribers with passive terrestrial path, with integrated power supply. Switching between inputs is done by DiSEqC 2.0 commands or by analogue commands 13/18 V, 0/22 kHz and Tone Burst. The unit is not Quad LNB compatible.

e_150_cp_16
e_150_cp_16
Klik hier
Info met toepassingsvoorbeeld
9 inputs distribution system for up to 8 subscribers with passive terrestrial path.

e_160_ap_8
e_160_ap_8
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. The units allow use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. The units are not Quad LNB compatible. Stand-by mode: All multi-switches of E.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
13 inputs distribution system for up to 8 subscribers with passive terrestrial path.

e_160_cp_8
e_160_cp_8
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. The units allow use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. The units are not Quad LNB compatible. Stand-by mode: All multi-switches of E.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
13 inputs distribution system for up to 8 subscribers with passive terrestrial path.

e_160_ap_12
e_160_ap_12
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. The units allow use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. The units are not Quad LNB compatible. Stand-by mode: All multi-switches of E.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
13 inputs distribution system for up to 12 subscribers with passive terrestrial path.

e_160_cp_12
e_160_cp_12
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. The units allow use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. The units are not Quad LNB compatible. Stand-by mode: All multi-switches of E.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as E.160-CP-12 but with a built-in amplifier for terrestrial input.

e_160_ap_16
e_160_ap_16
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. The units allow use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. The units are not Quad LNB compatible. Stand-by mode: All multi-switches of E.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
13 inputs distribution system for up to 16 subscribers with passive terrestrial path.

e_160_cp_16
e_160_cp_16
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. The units allow use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. The units are not Quad LNB compatible. Stand-by mode: All multi-switches of E.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as E.160-AP-16 but with a built-in amplifier for terrestrial input.

e_170_ap_8
e_170_ap_8
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply protected by a fuse and short-circuit protection. They allow to use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Stand-by mode: All multi-switches of E.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
17 inputs distribution system for up to 8 subscribers with passive terrestrial path.

e_170_cp_8
e_170_cp_8
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply protected by a fuse and short-circuit protection. They allow to use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Stand-by mode: All multi-switches of E.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as E.170-AP-8, but with a built-in amplifier for terrestrial input.

e_170_ap_12
e_170_ap_12
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply protected by a fuse and short-circuit protection. They allow to use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Stand-by mode: All multi-switches of E.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
17 inputs distribution system for up to 12 subscribers with passive terrestrial path.

e_170_cp_12
e_170_cp_12
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply protected by a fuse and short-circuit protection. They allow to use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Stand-by mode: All multi-switches of E.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as E.170-AP-12 but with a built-in amplifier for terrestrial input.

e_170_ap_16
e_170_ap_16
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply protected by a fuse and short-circuit protection. They allow to use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Stand-by mode: All multi-switches of E.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
17 inputs distribution system for up to 12 subscribers with passive terrestrial path.

e_170_cp_16
e_170_cp_16
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply protected by a fuse and short-circuit protection. They allow to use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Stand-by mode: All multi-switches of E.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as E.170-AP-16 but with a built-in amplifier for terrestrial input.