EMP-Centauri Multi-Switches Profi-Line

p121c4

Klik hier

Info met toepassingsvoorbeeld

Quadruple cascadable active tap designed for complex distribution systems. It is equipped with 16 satellite trunk inputs and outputs, 1 terrestrial trunk input and output, 16 satellite and 1 terrestrial tap outputs. The unit is suitable for 16 satellite polarities distribution.

p122a

Klik hier

Info met toepassingsvoorbeeld

A dual passive signal splitter with 4 SAT inputs and 1 terrestrial input, designed for connection with cascade taps P.121. This is de facto a system of 5 splitters in one unit. DC is passed through from outputs to inputs. Satellite inputs are used for connection of 1 Quatro or 2 Dual or Twin LNBs, terrestrial input for connection of TV or FM antenna or a preamplifier. The inputs of the unit can also be connected to the outputs of the amplifier P.156-MP. The units are stackable onto the top of each other.

p160ap8

Klik hier

Info met toepassingsvoorbeeld

Compact multi-switches of P.160 are an ideal choice for those who are interested in signal reception from 3 satellite positions. The offer includes versions for 8, 12 and 16 subscribers, where either AP variant with passive passage of terrestrial signals and return channel option or CP variant with active passage of terrestrial signals with continuous level control must be specified for each of them. Quatro or Quad type convertor may be used for A and B satellite position, Quatro-type LNB may only be used for C satellite position.
Main features:
15 dB attenuators for all satellite inputs
power-save function switches off momentarily unused LNBs and other innner circuits
grounding connector
13 inputs distribution system for up to 8 subscribers with passive terrestrial path.

p160cp8

Klik hier

Info met toepassingsvoorbeeld

Compact multi-switches of P.160 are an ideal choice for those who are interested in signal reception from 3 satellite positions. The offer includes versions for 8, 12 and 16 subscribers, where either AP variant with passive passage of terrestrial signals and return channel option or CP variant with active passage of terrestrial signals with continuous level control must be specified for each of them. Quatro or Quad type convertor may be used for A and B satellite position, Quatro-type LNB may only be used for C satellite position.
Main features:
15 dB attenuators for all satellite inputs
power-save function switches off momentarily unused LNBs and other innner circuits
grounding connector
13 inputs distribution system for up to 8 subscribers with built-in amplifier for terrestrial input.

p160ap12

Klik hier

Info met toepassingsvoorbeeld

Compact multi-switches of P.160 are an ideal choice for those who are interested in signal reception from 3 satellite positions. The offer includes versions for 8, 12 and 16 subscribers, where either AP variant with passive passage of terrestrial signals and return channel option or CP variant with active passage of terrestrial signals with continuous level control must be specified for each of them. Quatro or Quad type convertor may be used for A and B satellite position, Quatro-type LNB may only be used for C satellite position.
Main features:
15 dB attenuators for all satellite inputs
power-save function switches off momentarily unused LNBs and other innner circuits
grounding connector
13 inputs distribution system for up to 8 subscribers with passive terrestrial path.

p160cp12

Klik hier

Info met toepassingsvoorbeeld

Compact multi-switches of P.160 are an ideal choice for those who are interested in signal reception from 3 satellite positions. The offer includes versions for 8, 12 and 16 subscribers, where either AP variant with passive passage of terrestrial signals and return channel option or CP variant with active passage of terrestrial signals with continuous level control must be specified for each of them. Quatro or Quad type convertor may be used for A and B satellite position, Quatro-type LNB may only be used for C satellite position.
Main features:
15 dB attenuators for all satellite inputs
power-save function switches off momentarily unused LNBs and other innner circuits
grounding connector
13 inputs distribution system for up to 8 subscribers with built-in amplifier for terrestrial input.

p160ap16

Klik hier

Info met toepassingsvoorbeeld

Compact multi-switches of P.160 are an ideal choice for those who are interested in signal reception from 3 satellite positions. The offer includes versions for 8, 12 and 16 subscribers, where either AP variant with passive passage of terrestrial signals and return channel option or CP variant with active passage of terrestrial signals with continuous level control must be specified for each of them. Quatro or Quad type convertor may be used for A and B satellite position, Quatro-type LNB may only be used for C satellite position.
Main features:
15 dB attenuators for all satellite inputs
power-save function switches off momentarily unused LNBs and other innner circuits
grounding connector
13 inputs distribution system for up to 8 subscribers with passive terrestrial path.

p160cp16

Klik hier

Info met toepassingsvoorbeeld

Compact multi-switches of P.160 are an ideal choice for those who are interested in signal reception from 3 satellite positions. The offer includes versions for 8, 12 and 16 subscribers, where either AP variant with passive passage of terrestrial signals and return channel option or CP variant with active passage of terrestrial signals with continuous level control must be specified for each of them. Quatro or Quad type convertor may be used for A and B satellite position, Quatro-type LNB may only be used for C satellite position.
Main features:
15 dB attenuators for all satellite inputs
power-save function switches off momentarily unused LNB and other innner circuits
grounding connector
13 inputs distribution system for up to 8 subscribers with built-in amplifier for terrestrial input.

p170ap8

Klik hier

Info met toepassingsvoorbeeld

P.170 product line was designed to meet the highest requirements of contemporary market. There is no need to compromise whenever reception from 3 or 4 satelites is required. Up to 16 users can get all programming (both polarities, both bands) from up to 4 satellites using one single box, together with terrestrial analog or digital transmissions.
P.170 series multiswitches were designed primarily for use with Quatro LNBs. In case of utilising LNBs with band switching (Twin universal, Quad), attention must be given to proper setting up of built-in 22kHz generators. By that way it is possible to send 22kHz tone to four of the inputs and use for example Quad LNBs for satellite position A & B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D.
All of satellite inputs are equipped with 15 dB attenuators. Terrestrial input is offered as passive (with return path, marked AP) or active (without return path, marked CP). The multiswitch is designed as power-saving, it doesn't feed LNBs which are not received by any user at a time. Likewise, internal circuits enter into stand-by mode at the same time. Under such conditions power consumption is significantly reduced.
17 inputs distribution system for up to 8 subscribers with passive terrestrial path.

p170cp8

Klik hier

Info met toepassingsvoorbeeld

P.170 product line was designed to meet the highest requirements of contemporary market. There is no need to compromise whenever reception from 3 or 4 satelites is required. Up to 16 users can get all programming (both polarities, both bands) from up to 4 satellites using one single box, together with terrestrial analog or digital transmissions.
P.170 series multiswitches were designed primarily for use with Quatro LNBs. In case of utilising LNBs with band switching (Twin universal, Quad), attention must be given to proper setting up of built-in 22kHz generators. By that way it is possible to send 22kHz tone to four of the inputs and use for example Quad LNBs for satellite position A & B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D.
All of satellite inputs are equipped with 15 dB attenuators. Terrestrial input is offered as passive (with return path, marked AP) or active (without return path, marked CP). The multiswitch is designed as power-saving, it doesn't feed LNBs which are not received by any user at a time. Likewise, internal circuits enter into stand-by mode at the same time. Under such conditions power consumption is significantly reduced.
17 inputs distribution system for up to 8 subscribers with a built-in amplifier for terrestrial input.

p170ap12

Klik hier

Info met toepassingsvoorbeeld

P.170 product line was designed to meet the highest requirements of contemporary market. There is no need to compromise whenever reception from 3 or 4 satelites is required. Up to 16 users can get all programming (both polarities, both bands) from up to 4 satellites using one single box, together with terrestrial analog or digital transmissions.
P.170 series multiswitches were designed primarily for use with Quatro LNBs. In case of utilising LNBs with band switching (Twin universal, Quad), attention must be given to proper setting up of built-in 22kHz generators. By that way it is possible to send 22kHz tone to four of the inputs and use for example Quad LNBs for satellite position A & B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D.
All of satellite inputs are equipped with 15 dB attenuators. Terrestrial input is offered as passive (with return path, marked AP) or active (without return path, marked CP). The multiswitch is designed as power-saving, it doesn't feed LNBs which are not received by any user at a time. Likewise, internal circuits enter into stand-by mode at the same time. Under such conditions power consumption is significantly reduced.
17 inputs distribution system for up to 12 subscribers with passive terrestrial path.

p170cp12

Klik hier

Info met toepassingsvoorbeeld

P.170 product line was designed to meet the highest requirements of contemporary market. There is no need to compromise whenever reception from 3 or 4 satelites is required. Up to 16 users can get all programming (both polarities, both bands) from up to 4 satellites using one single box, together with terrestrial analog or digital transmissions.
P.170 series multiswitches were designed primarily for use with Quatro LNBs. In case of utilising LNBs with band switching (Twin universal, Quad), attention must be given to proper setting up of built-in 22kHz generators. By that way it is possible to send 22kHz tone to four of the inputs and use for example Quad LNBs for satellite position A & B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D.
All of satellite inputs are equipped with 15 dB attenuators. Terrestrial input is offered as passive (with return path, marked AP) or active (without return path, marked CP). The multiswitch is designed as power-saving, it doesn't feed LNBs which are not received by any user at a time. Likewise, internal circuits enter into stand-by mode at the same time. Under such conditions power consumption is significantly reduced.
17 inputs distribution system for up to 12 subscribers with a built-in amplifier for terrestrial input.

p170ap16

Klik hier

Info met toepassingsvoorbeeld

P.170 product line was designed to meet the highest requirements of contemporary market. There is no need to compromise whenever reception from 3 or 4 satelites is required. Up to 16 users can get all programming (both polarities, both bands) from up to 4 satellites using one single box, together with terrestrial analog or digital transmissions.
P.170 series multiswitches were designed primarily for use with Quatro LNBs. In case of utilising LNBs with band switching (Twin universal, Quad), attention must be given to proper setting up of built-in 22kHz generators. By that way it is possible to send 22kHz tone to four of the inputs and use for example Quad LNBs for satellite position A & B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D.
All of satellite inputs are equipped with 15 dB attenuators. Terrestrial input is offered as passive (with return path, marked AP) or active (without return path, marked CP). The multiswitch is designed as power-saving, it doesn't feed LNBs which are not received by any user at a time. Likewise, internal circuits enter into stand-by mode at the same time. Under such conditions power consumption is significantly reduced.
17 inputs distribution system for up to 16 subscribers with passive terrestrial path.

p170cp16

Klik hier

Info met toepassingsvoorbeeld

P.170 product line was designed to meet the highest requirements of contemporary market. There is no need to compromise whenever reception from 3 or 4 satelites is required. Up to 16 users can get all programming (both polarities, both bands) from up to 4 satellites using one single box, together with terrestrial analog or digital transmissions.
P.170 series multiswitches were designed primarily for use with Quatro LNBs. In case of utilising LNBs with band switching (Twin universal, Quad), attention must be given to proper setting up of built-in 22kHz generators. By that way it is possible to send 22kHz tone to four of the inputs and use for example Quad LNBs for satellite position A & B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D.
All of satellite inputs are equipped with 15 dB attenuators. Terrestrial input is offered as passive (with return path, marked AP) or active (without return path, marked CP). The multiswitch is designed as power-saving, it doesn't feed LNBs which are not received by any user at a time. Likewise, internal circuits enter into stand-by mode at the same time. Under such conditions power consumption is significantly reduced.
17 inputs distribution system for up to 16 subscribers with a built-in amplifier for terrestrial input.

p180_2

Klik hier

Info met toepassingsvoorbeeld

180-2 is a two customer IF distribution system for up to 8 satellites. In connection with Twin Universal LNBs, it can be used to distribute signals of up to 32 polarities. It has 16 inputs to connect up to 8 Twin LNBs, and 2 subscriber outputs. Inputs are selected from a receiver by DiSEqC 1.2 command "Goto nn" (6B), or by protocol DiSEqC 1.1. Inputs denoted as Sat System A, B, C or D are selectable also by command "Write NO" (38), which makes the unit compatible with standard DiSEqC 1.0 switching. All inputs are short cicuit protected.

p180_4

Klik hier

Info met toepassingsvoorbeeld

180-4 is a four customer IF distribution system for up to 8 satellites. In connection with Quad LNBs, it can be used to distribute signals of up to 32 polarities. The unit has 32 inputs to connect up to 8 Quad LNBs, and 4 subscriber outputs. Inputs are selected from a receiver by DiSEqC 1.2 command "Goto nn" (6B), or by protocol DiSEqC 1.1. Inputs denoted as Sat System A, B, C or D are selectable also by command "Write NO" (38), which makes the unit compatible with standard DiSEqC 1.0 switching. The inputs are short cicuit protected.

p180_8

Klik hier

Info met toepassingsvoorbeeld

180-8 is a eight customer IF distribution system for up to 8 satellites. In connection with Octo LNBs, it can be used to distribute signals of up to 32 polarities. The unit has 64 inputs to connect up to 8 Octo LNBs, and 8 subscriber outputs. Inputs are selected from a receiver by DiSEqC 1.2 command "Goto nn" (6B), or by protocol DiSEqC 1.1. Inputs denoted as Sat System A, B, C or D are selectable also by command "Write NO" (38), which makes the unit compatible with standard DiSEqC 1.0 switching. All inputs are short cicuit protected.