p162iw
p162iw
Klik hier
Info met toepassingsvoorbeeld
2in/1out DiSEqC 2.0 switch in weatherproof housing for connection of 2 satellite dishes to one receiver. The inputs of the switch are controlled from a receiver by "Position" command and are through for 22 kHz and DiSEqC signals.

p164iw
p164iw
Klik hier
Info met toepassingsvoorbeeld
4in/1out DiSEqC 2.0 switch in weatherproof housing for connection of up to 4 satellite dishes to one receiver. The inputs of the switch are controlled from a receiver by "Position" and "Option" commands and are through for 22 kHz and DiSEqC signals.

p168
p168
Klik hier
Info met toepassingsvoorbeeld
8in/1out switch designed for direct connection of up to 8 SAT IF inputs to one receiver. Inputs are selected by DiSEqC 1.2 command "Goto nn" (6B), or by protocol DiSEqC 1.1. Inputs 1 to 4 are selectable also by command "Write NO" (38), which makes the unit compatible with standard DiSEqC 4-input switching. The unit is short-circuit protected.

p154up
p154up
Klik hier
Info met toepasingsvoorbeeld
Compact multi-switches of P.150, 154, 155 series are designed for customer's signal distribution installations from two satellite positions for 4 up to 16 subscribers, including terrestrial radio and TV programs.
P.154 type with 4 outputs and P.155 with 8 outputs are currently produced in UP version, i.e. with the possibility of switching between active and passive passage of terrestrial signals, while for P.150 type for 12 and 16 subscribers it is necesssary to specify either AP variant with passive passage of terrestrial signals or CP variant with active passage of terrestrial signals.
Main features
- 22 kHz tone may be switched at the upper band inputs using miniature lever switches to allow for correct function of LNB Quad
- P.154 and P.155 types allow to supply power into a masthead amplifier from terrestrial input
- grounding connector
9 in/4out standalone distribution system.

p155up
p155up
Klik hier
Info met toepassingsvoorbeeld
Compact multi-switches of P.150, 154, 155 series are designed for customer's signal distribution installations from two satellite positions for 4 up to 16 subscribers, including terrestrial radio and TV programs.
P.154 type with 4 outputs and P.155 with 8 outputs are currently produced in UP version, i.e. with the possibility of switching between active and passive passage of terrestrial signals, while for P.150 type for 12 and 16 subscribers it is necesssary to specify either AP variant with passive passage of terrestrial signals or CP variant with active passage of terrestrial signals.
Main features
- 22 kHz tone may be switched at the upper band inputs using miniature lever switches to allow for correct function of LNB Quad
- P.154 and P.155 types allow to supply power into a masthead amplifier from terrestrial input
- grounding connector
9 in/8out standalone distribution system.

p150ap12
p150ap12
Klik hier
Info met toepassingsvoorbeeld
Compact multi-switches of P.150, 154, 155 series are designed for customer's signal distribution installations from two satellite positions for 4 up to 16 subscribers, including terrestrial radio and TV programs.
P.154 type with 4 outputs and P.155 with 8 outputs are currently produced in UP version, i.e. with the possibility of switching between active and passive passage of terrestrial signals, while for P.150 type for 12 and 16 subscribers it is necesssary to specify either AP variant with passive passage of terrestrial signals or CP variant with active passage of terrestrial signals.
Main features
- 22 kHz tone may be switched at the upper band inputs using miniature lever switches to allow for correct function of LNB Quad
- P.154 and P.155 types allow to supply power into a masthead amplifier from terrestrial input
- grounding connector
9 inputs distribution system for up to 12 subscribers with passive terrestrial path.

p150cp12
p150cp12
Klik hier
Info met toepassingsvoorbeeld
Compact multi-switches of P.150, 154, 155 series are designed for customer's signal distribution installations from two satellite positions for 4 up to 16 subscribers, including terrestrial radio and TV programs.
P.154 type with 4 outputs and P.155 with 8 outputs are currently produced in UP version, i.e. with the possibility of switching between active and passive passage of terrestrial signal, while for P.150 type for 12 and 16 subscribers it is necesssary to specify either AP variant with passive passage of terrestrial signals or CP variant with active passage of terrestrial signals.
Main features
- 22 kHz tone may be switched at the upper band inputs using miniature lever switches to allow for correct function of LNB Quad
- P.154 and P.155 types allow to supply power into a masthead amplifier from terrestrial input
- grounding connector
9 inputs distribution system for up to 12 subscribers with active terrestrial path.

p150ap16
p150ap16
Klik hier
Info met toepassingsvoorbeeld
Compact multi-switches of P.150, 154, 155 series are designed for customer's signal distribution installations from two satellite positions for 4 up to 16 subscribers, including terrestrial radio and TV programs.
P.154 type with 4 outputs and P.155 with 8 are currently produced in UP version, i.e. with the possibility of switching between active and passive passage of terrestrial signal, while for P.150 type for 12 and 16 subscribers it is necesssary to specify either AP variant with passive passage of terrestrial signals or CP variant with active passage of terrestrial signals.
Main features
- 22 kHz tone may be switched at the upper band inputs using miniature lever switches to allow for correct function of LNB Quad
- P.154 and P.155 types allow to supply power into a masthead amplifier from terrestrial input
- grounding connector
9 inputs distribution system for up to 16 subscribers with passive terrestrial path.

p150cp16
p150cp16
Klik hier
Info met toepassingsvoorbeeld
Compact multi-switches of P.150, 154, 155 series are designed for customer's signal distribution installations from two satellite positions for 4 up to 16 subscribers, including terrestrial radio and TV programs.
P.154 type with 4 outputs and P.155 with 8 outputs are currently produced in UP version, i.e. with the possibility of switching between active and passive passage of terrestrial signal, while for P.150 type for 12 and 16 subscribers it is necesssary to specify either AP variant with passive passage of terrestrial signals or CP variant with active passage of terrestrial signals.
Main features
- 22 kHz tone may be switched at the upper band inputs using miniature lever switches to allow for correct function of LNB Quad
- P.154 and P.155 types allow to supply power into a masthead amplifier from terrestrial input
- grounding connector
9 inputs distribution system for up to 16 subscribers with active terrestrial path.

p156mp25
p156mp25
Klik hier
Info met toepassingsvoorbeeld
Amplifier with 8 satellite inputs and one terrestrial input. It can be used as an input unit for cascade systems. LNBs are connected to the inputs, and cascade multi-switches or taps to the outputs of the amplifier. It is possible to use 2 Quatro or 4 Dual or Twin LNBs, Quad LNB is not supported. Input level can be set by attenuators in a range of 15 dB. Slope adjustment is available in range 0..12 dB for each satellite input. DC voltage of +18V is fed to terrestrial output of the amplifier, SAT IF outputs are galvanicly isolated from the power supply. The unit is equipped with a maglev ventilation fan.

p156mp15
p156mp15
Klik hier
Info met toepassingsvoorbeeld
Amplifier with 8 satellite inputs and one terrestrial input. It can be used as an input unit for cascade systems. LNBs are connected to the inputs, and cascade multi-switches or taps to the outputs of the amplifier. It is possible to use 2 Quatro or 4 Dual or Twin LNBs, Quad LNB is not supported. Input level can be set by attenuators in a range of 15 dB. DC voltage of +18V is fed to terrestrial output of the amplifier, SAT IF outputs are galvanicly isolated from the power supply. The unit is equipped with a maglev ventilation fan.

p156a
p156a
Klik hier
Info met toepasingsvoorbeeld
DiSEqC 2.0 cascadable distribution system with 9 inputs (8 satellite inputs and one terrestrial input), 9 trunkline outputs and 4 receiver outputs. This type of multiswitch cannot be used as standalone since it does not pass DC voltage from satellite receivers to feed LNBs. On the other hand, DC pass exists for all trunk lines. Therefore it can be used only in conjuction with any 9-inputs standalone multiswitch (P.156 are inserted between standalone multiswitch and LNBs) or with an amplifier, which feeds LNBs (P.156 are connected to the outputs of an amplifier, trunk outputs of last unit must be terminated with 75 ohm resistors). While the first option offers easy way how to extend existing distribution system, second option provides generally higher signal levels on the outputs. In any case, it is recommended to connect up to 5 of these units in a cascade. When higher number of output ports is required, P.158-A multiswitches can be used by the same manner. The product is offered in 5 differnt versions (P.156-A-5, P.156-A-10, P.156-A-15, P.156-A-20, P.156-A-25) with satelite band loss stepped from 5 dB to 25 dB to allow level balancing of the dustribution system.

p156c
p156c
Klik hier
Info met toepassingsvoorbeeld
The terrestrial-active version of P.156-A provides the same terrestrial tap losses as for satellite taps, thus level balancing of distribution system is possible even for terrestrial path. The trade-off is that this solution does not provide return path. Internal terr. amplifiers are fed via terrestrial trunk line (DC voltage 12 to 18 V, 15 to 20 mA per unit). Both instalation option discribed above are reasonable, but make sure that connected standalone multiswitch or insertion amplifier provides sufficient DC feed on terrestrial path and that DC-blocked termination is used on the other end of terrestrial trunk line. The product is also offered in 5 different version (P.156-C-5, P.156-C-10, P.156-C-15, P.156-C-20, P.156-C-25) with tap loss stepped from 5 dB to 25 dB.

p158a
p158a
Klik hier
Info met toepassingsvoorbeeld
A DiSEqC 2.0 cascadable distribution system with 9 inputs (8 satellite inputs, one terrestrial input), 9 trunkline outputs and 8 receiver outputs. Its use is fully described in section P.156-A. It is recommended to connect up to 5 of these units in a cascade. When available number of output ports is still not sufficient, it is possible to arrange more complex distribution system with several prarallel cascades, tied by splitters. (see P.122)
The product is offered in 5 different version (P.158-A-5, P.158-A-10, P.158-A-15, P.158-A-20, P.158-A-25) with satellite band loss stepped from 5 dB to 25 dB to allow level balancing of the distribution system.

p158c
p158c
Klik hier
Info met toepassingsvoorbeeld
The terrestrial-active version of P.158-A provides the same terrestrial tap losses as for satellite taps, thus level balancing of distribution system is possible even for terrestrial path. For installation notes please see section P.158-A. In addition, terrestrial trunk line must be fed according to section P.156-C.
The product is offered in 5 different version (P.158-C-5, P.158-C-10, P.158-C-15, P.158-C-20, P.158-C-25) with tap loss stepped from 5 dB to 25 dB to allow level balancing of the distribution system.

p121a
p121a
Klik hier
Info met toepassingsvoorbeeld
Cascadable passive tap designed for complex distribution systems. Tap outputs are galvanicly isolated from trunklines and should be connected to the inputs of a satellite multi-switch. The inputs of the first tap in a cascade should be connected to the outputs of the amplifier P.156- MP. The next tap can then be connected to the trunk outputs of the first one. In all it is possible to connect up to 10 units in series in a cascade provided they are connected to each other directly. If the units are connected to each other by means of a coaxial cable, it is only possible to connect a lower number of them. The number depends on the quality of the connectors and coaxial cable used, in particular on its reflection coefficient. Trunk outputs of the last unit in the cascade must be terminated by a 75 ohm resistor. The units are stackable onto the top of each other.

p121c
p121c
Klik hier
Info met toepassingsvoorbeeld
Cascadable active tap designed for complex distribution systems. Inbuild amplifiers at tap outputs reduce tap loss to low value of 3 dB, while keeping trunk loss at minimum. This part is therefore recommended for installation where higher insertion losses might be an issue. However, return path is not available. Internal satellite amplifiers are fed from its tap outputs, terrestrial amplifier is fed either from its own tap output or from trunk output (adjacent Sat tap), depending on what DC voltage is higher. Attention must be given to the choice of connected multiswitch. The multiswitch must always supply DC voltage either on its terr. or on its satellite inputs. For other installation notes please see section P.121-A.

p121a2
p121a2
Klik hier
Info met toepassingsvoorbeeld
Double cascadable passive tap designed for complex distribution systems. It has 8 satellite trunk inputs and outputs, 1 terrestrial trunk input and output, 8 satellite and 1 terrestrial tap outputs. The unit is suitable for 8 satellite polarities distribution.

p121c2
p121c2
Klik hier
Info met toepassingsvoorbeeld
Double cascadable active tap designed for complex distribution systems. It is equipped with 8 satellite trunk inputs and outputs, 1 terrestrial trunk input and output and 8 satellite and 1 terrestrial tap outputs. The unit is suitable for 8 satellite polarities distribution.

p121a4
p121a4
Klik hier
Info met toepassingsvoorbeeld
Quadruple cascadable passive tap designed for complex distribution systems. It is equipped with 16 satellite trunk inputs and outputs, 1 terrestrial trunk input and output, 16 satellite and 1 terrestrial tap outputs. The unit is suitable for 16 satellite polarities distribution.