160_cp_8
160_cp_8
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite system C and therefore we don't recommend to install Quad LNBs for SAT system C. Stand-by mode: All multi-switches of S.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as S.160-AP-8, but with a built-in amplifier for terrestrial input.

160_ap_12
160_ap_12
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite system C and therefore we don't recommend to install Quad LNBs for SAT system C. Stand-by mode: All multi-switches of S.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
13 inputs distribution system for up to 12 subscribers with passive terrestrial path.

160_cp_12
160_cp_12
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite system C and therefore we don't recommend to install Quad LNBs for SAT system C. Stand-by mode: All multi-switches of S.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as S.160-AP-12 but with a built-in amplifier for terrestrial input.

160_ap_16
160_ap_16
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite system C and therefore we don't recommend to install Quad LNBs for SAT system C. Stand-by mode: All multi-switches of S.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
13 inputs distribution system for up to 16 subscribers with passive terrestrial path.

160_cp_16
160_cp_16
Klik hier
Info met toepassingsvoorbeeld

Multi-switches with 13 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 3 Quatro or up to 6 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite system C and therefore we don't recommend to install Quad LNBs for SAT system C. Stand-by mode: All multi-switches of S.160 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as S.160-AP-16 but with a built-in amplifier for terrestrial input.

170_ap_8
170_ap_8
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. Stand-by mode: All multi-switches of S.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
17 inputs distribution system for up to 8 subscribers with passive terrestrial path.

170_cp_8
170_cp_8
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. Stand-by mode: All multi-switches of S.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
17 inputs distribution system for up to 8 subscribers with passive terrestrial path.

170_ap_12
170_ap_12
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. Stand-by mode: All multi-switches of S.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
17 inputs distribution system for up to 12 subscribers with passive terrestrial path.

170_cp_12
170_cp_12
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. Stand-by mode: All multi-switches of S.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as S.170-AP-12 but with a built-in amplifier for terrestrial input.

170_ap_16
170_ap_16
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. Stand-by mode: All multi-switches of S.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
17 inputs distribution system for up to 16 subscribers with passive terrestrial path.

170_cp_16
170_cp_16
Klik hier
Info met toepassingsvoorbeeld
Multi-switches with 17 inputs and up to 16 outputs. All types are DiSEqC 2.0 compatible devices for indoor use with an integrated power supply. It allows use of 4 Quatro or up to 8 Dual or Twin LNBs, while each of the subscribers can view all channels from the connected antennas. Input level can be set by attenuators in a range of 15 dB. Using a built-in switch, it is also possible to send the command “22 kHz” to up to 4 selected SAT inputs for high band continuously; in this case it is possible to connect also Twin Universal or Quad LNBs to the high band inputs of satellite systems A&B. Please note that it is not possible to send 22 KHz tone to inputs for satellite systems C&D and therefore we don't recommend to install Quad LNBs for SAT system C&D. Stand-by mode: All multi-switches of S.170 series are equipped with an LNB power supply control system. The system reduces the power taken from the power supply by feeding only those LNBs whose signals are received by the connected subscribers at a time. So the power consumption may be reduced to approx. 10 VA (depending on the multi-switch type).
The same as S.170-AP-16 but with a built-in amplifier for terrestrial input.